Manage cookies

We use cookies to improve our services. Read more about how we use cookies and how you can refuse them.

The necessary cookies help to make the website work properly.

Anonymous statistical cookies help to understand how visitors use the website.

  • MicroPython
    5 min | 20595

    #MicroPython: Tutorial and updated support for ESP32, M5Stack cameras

    MicroPython | 5 min | 20595


    Last week, I got some time to update the lemariva/micropython-camera-driver to the actual versions of MicroPython, ESP-IDF, and the camera driver for the OV2640. MicroPython has changed since version 1.14 from make to CMake which makes it easier to add support for different modules: in this case for the OV2640.

    I will sum up the steps to compile MicroPython from Scratch, I've already written a tutorial for that:

    but since a lot has changed, I've re-written it.

    Flash MicroPython

    To flash MicroPython, you need to install the esptool. This can be made by typing the following on a Terminal.

    pip3 install esptool

    This required to have installed python3 and python3-pip on Linux. On Windows, by installing Python3 you need to set the pip tool option.

    After installing the tool, you can go to the MicroPython firmware section and download the last version compatible with your board.

    The page corresponding to your board includes the intructions to install MicroPython. For example, for an ESP32-based board, you need to type the following on a terminal:

    esptool.py --chip esp32 --port /dev/ttyUSB0 erase_flash

    After erasing the flash, you write the MicroPython fimware starting at address 0x1000 by typing:

    esptool.py --chip esp32 --port /dev/ttyUSB0 --baud 460800 write_flash -z 0x1000 esp32-20210902-v1.17.bin

    That's all you need. To connect to the board, you can use the VSCode IDE described below.

    To get MicroPython running on ESP-based boards is really quite easy, right? However, if you want to add support to cameras, or other devices adding a C module to your firmware, you need to compile MicroPython from scratch or get a pre-compiled firmware.
    To do that, check out the section "MicroPython from Scratch using Linux for ESP32-based boards" below.

    IDE for MicroPython and Intellisense

    To program MicroPython and upload the code to the boards running MicroPython, I use Visual Studio Code (VSCode) and the Pymakr extension.

    The open-source VSCode is a code editor redefined and optimized for building and debugging applications. It is compatible with Windows, Linux and Mac OS X.

    Visual Studio Code - Pymakr extension
    Fig. 1: Visual Studio Code - Pymakr extension

    To use VSCode for MicroPython, you need to install the Pymakr extension (see Fig. 1).

    This extension enables VSCode to communicate to a board running MicroPython using the build-in command line REPL. Thus, you can run a single file on your board, sync your entire project or directly type and execute commands using the terminal on VSCode.

    However, you'll miss some of the main features of VSCode, namely intellisense, autocompletion, and linting capabilities. You can combine this extension with the micropy-cli Python module to get those features. You can find more information in this tutorial.

    MicroPython from Scratch using Linux for ESP32-based boards

    To build MicroPython from scratch, you need to install a toolchain first and the ESP32 framework. ESP32 uses the "Espressif IoT Development Framework (ESP-IDF)" and the toolchain xtensa-esp32-elf. You get those from Github by typing:

    mkdir ~/esp
    cd ~/esp
    
    git clone https://github.com/espressif/esp-idf.git
    cd esp-idf
    git checkout b64925c5673206100eaf4337d064d0fe3507eaec
    git submodule update --init --recursive
    ./install.sh

    The ./install.sh command downloads the toolchain.

    Note 1: take the hash that I wrote above! If you use a newer commit you'll get the following a Guru Meditation Error: Core 1 panic'ed (LoadProhibited) error. Check this issue for more information.

    Note 2: for the next steps, I assumed that you clone the framework inside $HOME/esp/ and MicroPython inside $HOME/Documents/MicroPython. If you didn't do that, you need to update some paths below.

    After doing those steps, download MicroPython and its dependencies using:

    cd ~/Documents
    git clone https://github.com/micropython/micropython
    cd micropython
    git checkout [COMMIT_HAST]
    git submodule update --init --recursive

    The git checkout [COMMIT_HAST] can be ignored if you want the latest version. Otherwise, you need to define the branch or [COMMIT_HAST] that you want to clone.

    Before starting to compile MicroPython, you need to add to the $PATH environmental variable the toolchain and framework paths. Thankfully, the framework does that for us by typing:

    . $HOME/esp/esp-idf/export.sh

    Then build the MicroPython cross compiler:

    cd $HOME/Documents
    cd micropython/mpy-cross
    make

    and go to the MicroPython port folder for the ESP32:

    cd micropython/ports/esp32

    and build MicroPython:

    make BOARD=[ESPECIFIC_BOARD]

    Note: I got some errors while compiling related to the berkeley (DBTree) library:

    micropython/lib/berkeley-db-1.xx/PORT/include/db.h:1:1: error: expected identifier or '(' before '.' token
     ../../include/db.h

    To solve those errors, I edited following files inside the folder micropython/lib/berkeley-db-1.xx/PORT/include:

    • bsd-queue.h: queue.h > #include "queue.h"
    • db.h: ../../include/db.h > #include "../../include/db.h"
    • filevtable.h: ../../include/filevtable.h -> #include "../../include/filevtable.h"
    • mpool.h: ../../include/mpool.h -> #include "../../include/mpool.h"

    MicroPython 'pip install'

    To install new packages on your ESP32 board, you need first to connect it to the Internet. You can do that using the network module and by running the following:

    import network
    
    ssid_ = [ROUTER_SSID]
    wp2_pass = [ROUTER_WPA2_PASSWORD]
    
    sta_if = network.WLAN(network.STA_IF)
    sta_if.active(True)
    sta_if.connect(ssid_, wp2_pass)
    
    while not sta_if.isconnected():
        pass
    
    print('network config:', sta_if.ifconfig())
    

    Then, to install a package, simple type the following, the result is shown on Fig. 1.

    import upip
    upip.install('notes-pico')
    upip install notes-pico
    Fig. 2: Installing notes-pico using the package manager upip.

    A lot of packages listed on pypi are dummy packages (versioned with 0.0.0). That means, they are empty. Installing packages on the ESP8266 is a challenge because of the limited RAM. You usually get a memory allocation error.

    MicroPython with Camera Support (OV2640)

    The following steps are needed if you want to add camera support to MicroPython.

    1. Add to the ESP-IDF components the driver camera:
      cd cd ~/esp/esp-idf/components
      git clone https://github.com/espressif/esp32-camera.git
      cd esp32-camera
      git checkout 093688e0b3521ac982bc3d38bbf92059d97e3613
    2. After cloning the drivers, clone the MicroPython module for the camera:
      cd $HOME/Documents
      git clone https://github.com/lemariva/micropython-camera-driver.git
    3. Copy the files and folders inside the boards folder into micropython/ports/esp32/boards. Or use a symbolic link ln -s [...]/micropython-camera-driver/boards/ESP32_CAM [...]/micropython/ports/esp32/boards/ESP32_CAM (recommended - change the [...] to the right path).
    4. Compile the firmware by typing following commands:
      cd micropython/ports/esp32
      make USER_C_MODULES=../../../../micropython-camera-driver/src/micropython.cmake BOARD=ESP32_CAM all

      Note that the folder micropython-camera-driver should be in the same folder level as the micropython. Otherwise, you'll need to change the path (../../../../micropython-camera-driver/src/) to the micropython.cmake file.

    5. Deploy the firmware into the ESP32 by typing:
      cd micropython/ports/esp32
      esptool.py --port /dev/ttyUSB0 erase_flash
      esptool.py --chip esp32 --port /dev/ttyUSB0 write_flash -z 0x1000 build-ESP32_CAM/firmware.bin
      Note 1: To flash the ESP-CAM board shortcuts the GND and the GPIO00 pins. After flashing the board, remove the shortcut and reset the board.

      Note 2: If you have a serial console or plugin connected to the board, you need to detach the connection. Otherwise, you won't be able to flash the firmware using the esptool.

      Note 3: The serial port /dev/ttyUSB0 could change. You can list the devices using `ls /dev/ttyUSB*` to see, which USB port number is active.

    Examples

    The MicroPython example codes are included here:

    Conclusions

    This article is a needed update from my last tutorial for MicroPython. I try to keep it compact to reduce redundancy between the posts. You can check them, they usually have a troubleshooting area. Check also the issue area, maybe your question or problem has been already answered and solved. I invite you anyway to extend the driver for more cameras and options and send me a PR with your code so that I can merge it. :)


    Comments

    Empty