Android Things | 2 min | 2423
This article extends the node tree of ProjectDiva to include an Arduino Pro Mini.
This article explains how to connect a Arduino Pro Mini to the nRF24Things application (Android Things). The code allows sending and receiving messages between the nodes. It uses the well-known nRF24 libraries to create a sensor mesh, where the node 0 (in this case a Raspberry Pi running the Android Things application) actuates as a "DHCP" server and assigns the node addresses in the mesh.
Android Things | 1 min | 766
I've recently updated the
nRF24Thingsproject. I introduced some changes to the database main table (
sensors) and to the handler class
DatabaseHandler. Additionally, I added a second table for the payloads (
payload). The two tables are related using the foreign key
nodeID. I added some search options for the payloads: search by payloadID, nodeID etc.
The main idea of this project is to measure the humidity, temperature, air quality etc. of a room with multiple sensors (may be using the Pi...
Android Things | 3 min | 1562
I had some humidity problems in the basement and I thought I can buy a dehumidifier. I bought this one on banggood Dehumidifier 500ml. I knew they are not good enough, but I wanted to try.
This type of dehumidifier uses a peltier element to cool an alumium disipator (peltier cool side), which condenses the humidity. The condensed humidity drips into a water tank until it is full. Then, a switch is triggered and the system stops. The peltier hot side has a bigger disipator and together with a fan disipate the generated heat.
Code: https://goo.gl/CPGcYK Eagle: https://goo.gl/xFcc24
Android Things | 1 min | 753
I've recently updated the code for the communication between the raspberry pi v3 and the rf24l01+ module using android things (0.)4.1.
You need the following things:
nRF24Things: https://goo.gl/SNnhxq Android Things (0.) 4.1
You can find more info about the project on https://goo.gl/XsRJtI .
Android Things | 6 min | 3181
I've just uploaded the Java codes for the
rf24Meshthat work with Android Things. This time I didn't write a library because I thought it was better to upload an Android project that can be opened with Android Studio (>2.2.3) and directly started on the Raspberry Pi. I think this can also work with NXP Pico i.MX6UL and Intel® Edison with minor modifications (especially in the